Brewing Thermometer - HI935012

In stock

Made for serious craft and hobby brewers, Hanna's Brewing Thermometer is all you need to ensure that you get accurate temperature results throughout the entire brew process. Designed to withstand the knocks, drops, and spills of real life, the new IP65 body provides top performance while the extra long probe reaches deep into your brew kettle for reliable measurements. The included canvas case makes storage and transportation a cinch.

  • ±0.1 °C/ ±0.2 °F accuracy
  • IP65-rated meter for durability on the brewery floor (included boot for even more protection!)
  • Extra long, stainless steel probe for extended immersion into tanks and kettles.
  • Not suitable for body temperature measurements.


CAL Check™ Feature

Hanna's Brewing Thermometer includes our exclusive CAL Check™ technology. CAL Check™ reassures you that your meter is working at its best so that you can be confident in all of your results.

Long Battery Life

The included AAA batteries provide 4500 hours of continuous use. When the battery level is below 10%, a warning symbol will blink to indicate low battery condition. If low battery power may affect your results, the meter will shut down to avoid poor readings caused by low battery level.

Automatic Shut-off

The auto-off feature prolongs battery life for peace-of-mind and energy savings if the meter is accidentally left on. The auto-off feature can be set to shut the meter off at 8 or 60 minutes, or it can be disabled so that the meter continuously stays on.


Portable Design

Hanna's Brewing Thermometer has been made to fit comfortably in your hand for on-the-go testing. A large LCD display provides at-a-glance readings from any angle and single button operation streamlines the testing process for any brewer.

Built to be Durable

Designed to withstand the knocks, drops, and spills of real life, the IP65 body and included boot offer increased protection for a durable thermometer than can handle any brewing environment. These meters are well protected against dust and water splashes from any direction.

Watertight Connection

A Quick DIN connector makes attaching and removing the probe simple and easy. The rubber coating protects the cable and creates a sealed connection for added reliability.


Supplied with 1m Stainless Steel Temperature Probe

The FC762N2 temperature probe is a rugged penetration probe measuring 1 meter in length. The stainless steel probe is both durable and easy to clean, the perfect combination to meet the tough environment encountered in breweries. Each probe is made extra long so that you can reach further into your tanks without compromising on safety or accuracy.

Completely Interchangeable Probes

Hanna's Brewing Thermometer works with a wide range of thermistor probes, including an assortment of specially engineered FC762 probes, so you can get the right probe for your brewery.





-20.0 to 120.0 °C -4.0 to 248.0 °F


0.1 °C 0.1 °F

Accuracy (@20˚C/68˚F)

±0.1 °C (-20.0 to 120.0 °C) ±0.2 °F (-4.0 to 248.0 °F)



Probe Accuracy

±0.3 °C (-10.0 to 80.0 °C) ±0.5 °F (14 to 176 °F) ±0.7 °C / ±1.3 °F remaining range


1.5V AAA (3 pcs.) approx. 4500 hours of continuous use


user selectable: after 8 min, 60 min or disabled


For product internal measurement: Rated operating condition: -20 to 50 °C (-4 to 122 °F) Limiting condition: -30 to 50 °C (-22 to 122 °F) Storage and transportation condition: -40 to 70 °C (-40 to 158 °F) Relative Humidity 100 %

Storage/transport temperature

-40 to 70 °C (-40 to 158 °F)


140 x 57 x 28 mm (5.5 x 2.2 x 1.1”)


175 g (6.17 oz.)

Case Ingress Protection Rating



*The measurement range may be limited by probe type.


2 years